V-TÜF Dust Extractor

We have some exciting news, following public demand, we are now stocking the V-TÜF dust extractor M-class.

The V-TÜF  is the perfect dust vacuum to help control dust particles at source, covering a variety of applications and materials including wood and plastic. Fercell are committed to providing customers with the best value products for health protection and the V-TÜF will do just that.

The M class rating that this dust vacuum holds is now a HSE requirement and means that this is the minimum legal requirement for all construction sites and this dust extractor is recognised as a lung safe dust vacuum cleaner. The yellow universal power tool connector means that the dust vacuum can be attached straight to the tool in use and is so bright that you won’t lose it (well we hope not anyway!).

It’s suitable for the three main types of construction dust:

  • silica dust
  • wood dust, including MDF and plywood
  • lower toxicity dusts such as dolomite, plasterboard and marble

The V-TÜF dust extractor covers respirable dust and inhalable dust and is suitable for completing the following applications safely:

  • dustless sweeping
  • on-tool extraction
  • carpet cleaning
  • cleaning stairs
  • sanding
  • drilling
  • drain cleaning
  • debris collecting

A handy blow feature is also included in the V-TÜF dust extractor, which blows pure, filtered air and can be used to unblock drains or clear leaves when completing an outside project.

To ensure the dust vacuum cleaner is working to its highest standard and is safe to use, a LEV test should be conducted every 14 months.

The HEPA cartridge filter included in the machine should be inspected for damage to the seal, cap and filter medium on a regular basis. The extraction velocity monitor should also be checked each time before the dust extractor is used and if it shows red, it will need to be cleaned.

Available models: 800W, 1,400W.

Also available upon request is the H class V-TÜF.

IPE Article