Blog

Goodbye to Dippy and dust

Goodbye Dippy

The Natural History Museum have not only been updating their main hall with the replacement to the 112 year old exhibit Dippy, but their maintenance workshops have also had a full upgrade with a new dust extraction and centralised ducting systems.

The iconic exhibit Dippy, is being replaced by an 83ft whale skeleton, which will serve as a reminder of our responsibility to the planet. Particularly as Dippy is actually a plaster cast replica of a diplodocus, whereas the whale was brought to the museum in 1981, after it beached itself in Ireland. Although Dippy is very much loved by tourists from all over the world, the whale will service to remind visitors of the scale of our responsibility to the planet.

With this very important task in hand, and as part of their 10-year modernisation programme, Fercell Engineering were delighted to carry out modifications to the NHM’s existing dust extraction system. As a favourite attraction for millions of people, it was essential that the work was completed as quickly as possible.

A very tight operation

The current dust extraction unit and centralised ducting system firstly needed to be dismantled and carefully removed from their site.

Two newly supplied dust extractors were installed, one servicing the left hand side and the other servicing the right hand side. The right hand unit was equipped with a diverter valve so that either the down-draft suction table or the other machine tools can be serviced at any one time.

Connecting to the inlet aperture of each dust extractor now stands a correctly sized and balanced centralised steel ducting system.  The duct rises to an approximate height of 3m before traveling throughout the workshop and dropping to each of the listed machine tools, with the final connection with flexible suction hose.

The problem with spiral ductwork

When conveying particulates such as dust, unique design principles are required, which are not necessarily provided in typical HVAC air distribution systems which often favour spiral ductwork. Sometimes creating bespoke systems is the best form of attack. Our design engineers love a challenge and enjoy creating bespoke solutions which will perfectly meet the needs of a customer and their ventilation system and allow them to get creative and not deliver a standard system.

The issue with standard HVAC spiral ductwork, is it has the potential for a build-up of particles within the duct system, which reduces system efficiency. This in turn increase as power consumption and ends in the risk of loss of conveyance. This slows the process down and ultimately ends up costing a business money. It is also catastrophic in terms of efficiency of output.

Kwik-fix ducting solution

Fercell decided that the best fit for the NHM’s ventilation system would be a ‘Kwik-fix’ ducting system, which is specifically designed and suited for all types of industries including woodworking, textile, food processing, pharmaceutical, chemical and grain handling, that require the use of a ductwork system for the transportation and/or collection of particles.

Fercell’s Managing Director Mark Fletcher said: “We are honoured to have been involved with the 10-year modernisation programme at the Natural History Museum. The main aim and goal behind this new system we have refurbished and reinstalled, is that it should last another lifetime and be upgraded as and when needed.”

Our kwik-fix ducting solutions Plant and Works Engineering Article Health and Safety Matters Industrial Plant & Equipment Recycling Waste World