| sub
links Sirocco
Dryback Cascade Waterwash PowdercoatingProcess
Rooms Heated Process Air OvensHandling
Equipment CompressorsSpray
Filter Technology PDF DownloadBrochure |
|
spray
/ Sirocco dryback spray boothes
 |
The Sirocco’s modular
design provides the flexibility to deliver efficient and economical
spray booth filtration, across all industries spraying on an
intermittent basis, meeting and exceeding current BS and EU
regulations and complying with HS(G)178 ‘The spraying
of flammable liquids’.
The Sirocco can be used in harsh and hazardous environments, with various electrical
control, lighting, filtration exhaust and drive options (EExd).
The simple and robust design enables fast construction and installation, without
the need a specialist tools. The Sirocco is available in alternative construction
materials/finishes (standard material: prime galvanised sheet steel), stainless
steel, paint finish, powder finish. |
The Fercell Sirocco benefits from a smooth
internal design, ensuring minimum turbulence, pressure drop and
easy maintenance.
SIROCCO BENCH BOOTH
 |
Designed to optimise space,
the standard Sirocco bench booth range has 5 models, with
widths from 1100mm to 3300mm, other sizes can be supplied
to meet client’s exact requirements, included under
bench storage and bench division.
Models1.10
| 1.65 | 2.20 | 2.75 | 3.30 |
SIROCCO DRY BACK BOOTH
 |
There are 27 models in the range with operating widths from
1100mm to 6600mm, other sizes can be supplied to meet client’s
exact requirements.
The Sirocco bench and dry back booths are supplied with standard,
disposable, paper filter media, alternative filter media can
be supplied to meet more demanding or specific requirements.
|
Models
2.20m
High
1.10 | 1.65 | 2.20 | 2.75 | 3.30
3.85 | 4.40 | 4.95 | 5.50 | 6.05
6.60 |
2.75m High
2.20 | 2.75 | 3.30 | 3.85 | 4.40
4.95 | 5.50 | 6.05 | 6.60 |
3.30m High
2.75 | 3.30 | 3.85 | 4.40 | 4.95
5.50 | 6.05 | 6.60 |
ANCILARIES ATTENUATORS
Although the drive generated noise level is low, the air movement
noise level is far greater, with an approximate internal level of
78 dB(A) and external level of 82 dB(A) (calculated 2 metres from
the fan).
Various methods of attenuation can be used for the reduction of both
internal and external operational noise levels. Typical arrangements
are the use of in-line silencers (podded or un-podded) on either
side of the fan (entry/exit).
Further reductions can be achieved by the use of different fan specifications
(for example reducing operating speeds and increasing unit numbers).
Models
Podded
1.10 | 1.65 | 2.20 | 2.75 | 3.30
3.85 | 4.40 | 4.95 | 5.50 | 6.05
6.60 |
Un-Podded
2.20 | 2.75 | 3.30 | 3.85 | 4.40
4.95 | 5.50 | 6.05 | 6.60 |
|
WATER TREATMENT
A suitable chemical additive must be added to water wash booths to denature paint
and similar materials within the water. This will extend periods between routine
maintenance and control the efficiency of the Booth.
As well as denaturants and additives, Fercell can supply a comprehensive range
of booth cleaners, foam suppressant solutions and biocides, helping keep spray
process areas in optimum operating condition.
EG ENERGY VALVE
The Fercell EG energy switch is designed
for installation directly beneath exhaust fans and can be used with
all type of spray booths.
The EG is a remotely activated valve, which
applies a gradual break to the extraction of air, when a paint spray
gun is hung on the internally mounted trigger.
The EG trigger can be configured to operated
individual fan units or multiple units and operatives.
The EG energy valve is driven and operated completely by air, therefore
it can be used in any hazardous zone, ensuring compliance with all
current BS and EU regulations.
When the EG is fully closed, a small volume of extracted air is permitted
to pass, ensuring that any build-up of vapours/fumes, from products
left within the booth, are evacuated.
The EG permits sprayed items to be left within the spraying area,
either during their drying phase or shift patterns, whilst reducing
electrical consumption and heat loss.
There are 6 models in the range, with diameters ranging from 400mm
up to 800mm.
ModelsEG40
| EG50 | EG60 | EG63 | EG70 | EG80
LIGHTING
An area which is often overlooked is the provision of sufficient
lighting, the extraction and filtration of vapour and over-spray
is just one side to achieving a quality finish. Consideration should
be made to the correct lighting of any area, paying particular attention
to the various levels of lighting and the reduction of both glare
and shadow.
Fercell has a range of lighting solutions, for both standard process
(zone 3) and hazardous process areas (zones 1 and 2).
There are numerous models in the range, with outputs various configurations.
SURFACE TREATMENT
The provision of good quality light is an important part of achieving
a quality finish, so any light which is within the process area should
be optimised by both reflection and good house keeping. It is therefore
recommended that the internal surface of the process area is treated
with Fercell’s range of white peelable coatings, these can
be supplied for cover wall and floor areas.
Fercell’s protective coatings have excellent
reflective properties and reduce maintenance and
the risk of fire (coatings can be applied by either
brush or spray gun).
|
|
