PRODUCTSSirocco
Dryback Cascade Waterwash PowdercoatingProcess
Rooms Heated Process Air OvensHandling
Equipment CompressorsSpray
Filter Technology PDF DownloadBrochure
|
|
spray
/ovens
The
Fercell commercial/industrial oven range is comprehensive, with
different size, temperature and type options.
Electric – LPG – Natural Gas
 |
Midi
Box Oven
The Fercell Midi box ovens are for small batch curing requirements, with manual
loading via a single front door.
The Midi box oven is ready installation pre-assembled, wired and tested
only requiring connection to mains supplies (inc. exhaust system).
The Midi heat recirculation system uses a centrifugal fan set, circulating
heated air through an insulated duct system, ensuring optimum thermal efficiency
and low running costs.
The Midi incorporates all necessary safety/operation controls and explosion
relief panels and can be supplied with additional control/charting systems.
Box Oven
The Fercell box oven is supplied, as standard, pre-assembled, wired and tested
only requiring connection to mains services (inc. exhaust system).
For export and restricted access delivery, the modular designed ovens have a
bolted panel construction, enabling economic delivery, assembly and installation.
The box oven can be supplied with either direct ribbon heat or heat recirculation
systems.
The ribbon burner generates heat through low level banks of direct flame burners,
allowing the most cost effective oven heating option, ribbon burner systems can
only be used for applications which do not require accurate temperature control. |
The recirculation system uses a centrifugal fan set, circulating
heated air through an insulated duct system, ensuring optimum
thermal efficiency and low running costs.
Manufactured for commercial and industrial applications, the oven is constructed
from a variety of materials and is available in a variety of finishes.
The box oven incorporates various safety and operation controls, including
anti-operator entrapment and explosion relief panels. The oven can be supplied
with numerous options.
Construction MaterialsDouble Skin Galvanised Steel/Stainless Steel
Rockwool Insulation
Painted/PowdercoatedAccessDouble Swing Doors
Sliding Doors
Vertical Doors
Twin End DoorsControlPID Control
Chart Recorder
Digital Modulation Control
Conveyor Tunnel
Oven
The Fercell conveyor oven is modular in design and has a bolted panel construction,
enabling cost effective delivery and quick assembly/installation.
The conveyor oven is available in single, twin or multi-pass arrangements
with heat recirculation system, incorporating centrifugal fan sets, insulated
duct system, safety controls, chart recorders and explosion relief panels.
Conveyor systems are tailored to the specific requirements of the application
with volume, weight, and dimension amongst other variables effecting selection.
Catalytic Infrared Oven
The Fercell infrared oven uses flameless gas fired catalytic technology
to generate an economic heat source, which is completely safe even in the
presence of flammable solvent based liquids and vapours.
The infrared oven has a recirculation system which uses a centrifugal fan
set to draw the heated air (generated by the catalytic units and reflected
heat) from the top of the oven passing in back around the oven and over
the catalytic units (oxidising any solvent vapours).
The VOC or solvent vapours which pass across the face of the catalytic
units are combusted without flame in the same manner as the gas fuel, this
ensures improved environmental emissions of reduced VOCs, carbon dioxide
and water vapour (there are no emissions of carbon monoxide, nitrogen oxide
or sulphur dioxide).
The Fercell infrared oven is completely constructed from pre-fabricated
double skin polished stainless steel panels, incorporating high grade rockwool
insulation.
Mobile Catalytic Infrared Dryer
The Fercell mobile infrared dryer uses the same principle and fuel operation
as the oven, generating an economic heat source wherever required.
The unit is complete with catalytic unit, articulated arm, trolley, support
and electronic ignition control (gas bottle not supplied).
Once the heaters pre-heat cycle has finished the dryer runs on gas alone,
and can be wheeled into any hazardous zoned area.
The VOC or solvent vapours which pass across the face of the catalytic
units are combusted without flame in the same manner as the gas fuel. This
ensures improved environmental emissions of reduced VOCs, carbon dioxide
and water vapour (there are no emissions of carbon monoxide, nitrogen oxide
or sulphur dioxide). |
|
