| PRODUCTSExhaustPortableMobile
/ WallFlexible Arms PDF
Download Brochure |
|
Fume
/ Exhaust
VEHICLE
EXHAUST SYSTEM
 |
Fercell’s range of vehicle exhaust systems, provide
a comprehensive solution to the dangers from exposure to
vehicle exhaust emissions.
Designed for commercial/industrial applications to minimize the health risk to
personnel, the range includes fixed, rail and mobile exhaust extraction systems.
|
FIXED SYSTEMS
AP
Drop Exhaust Extractors
 |
The AP single and twin drop models are supplied complete
(fan, support system, exhaust hose and exhaust nozzle)
ready for easy installation. The simple and economical
solution for stationary locations, with a maximum operating
temperature of 100ºC, is available in 7 models with
hose diameters ranging from 60mm up to 125mm and air handling
capacities from 350 m³/h to 1800 m³/h
to accommodate any vehicle size.
ModelsAP1
60 | AP1 75 | AP1 100 | AP1 125 | AP2 75 | AP2 100
AP2 125 |
AS Exhaust Reel Extractors
 |
Exhaust reels are designed to provide a simple and cost effective
storage of exhaust hoses within the vehicle area. They can
be used independently, on a track system or alternatively
incorporated within a multi reel centralised system.
The AS range is complete with reel, hose and exhaust nozzle (the V models are
supplied with direct mounted, high temperature fan sets).
There are two main types of exhaust hose reel, mechanical spring and motorised
movement. |
AS Mechanical Spring Reel
The spring recoil drum stores exhaust extraction hose tight, at height,
until required. The hose is effortless released and locked into position
by simply pulling the hose end through the ratchet cycle, before
connecting to vehicle exhaust pipe.
There are 18 models in the AS range, with hose diameters ranging
from 60mm to 150mm and lengths from 7 metres up to 13 metres.
ModelsAS
60/7 | AS 75/10 | AS 75/13 | AS 100/10 | AS 100/13
| AS 125/10 | AS 125/13
AS 150/10 | AS 150/13
ASV 60/7 | ASV 75/10 | ASV 75/13 | ASV 100/10 | ASV 100/13 | ASV
125/10
ASV 125/13 | ASV 150/10 | ASV 150/13
AS Motorised Reel
The motor driven drum stores exhaust extraction hose tight, at height,
until required. The reel is available in two control types, cable
mounted control or infra-red remote control, enabling easy operation.
There are 36 models in the AS range, with hose diameters ranging
from 60mm to 150mm and lengths from 7 metres up to 13 metres.
Models
Cable Mounted ControlAS-MP
60/7 | AS-MP 75/10 | AS-MP 75/13 | AS-MP 100/10 | AS-MP100/13
AS-MP 125/10 | AS-MP 125/13 | AS-MP 150/10 |
AS-MP 150/13
ASV-MP 60/7 | ASV-MP 75/10 | ASV-MP 75/13 | ASV-MP 100/10 | ASV-MP
100/13
ASV-MP 125/10 | ASV-MP 125/13 | ASV-MP 150/10 | ASV-MP 150/13
Infra-red
ControlAS-MT
60/7 | AS-MT 75/10 | AS-MT 75/13 | AS-MT 100/10 | AS-MT100/13
AS-MT
125/10 | AS-MT 125/13 | AS-MT 150/10 | AS-MT 150/13
ASV-MT 60/7 | ASV-MT 75/10 | ASV-MT 75/13 | ASV-MT 100/10
ASV-MT 100/13 | ASV-MT 125/10 | ASV-MT 125/13 | ASV-MT 150/10
ASV-MT 150/13
CA Rail System
 |
The AP and AS range can be used in conjunction with the rail system, the reel
is fitted to a, smooth running trolley, which is easily moved along a straight
rail. The rail has been designed to deliver high suction efficiency and is
easily connected to a centralized fan set.
The AP units are supplied with balancer to keep the drop hose raised. |
REV Semiautomatic System
 |
Used in conjunction with the CS rail system,
the REV enables exhaust extraction from moving vehicles.
As the vehicle moves along the length of the rail, the trolley mounted hose attachment
follows. Upon the vehicle reaching the end of the rail the travel stop is activated,
the exhaust nozzle is released and the trolley returns to its home position.
|
Exhaust Nozzles
BA Steel Nozzles
 |
Manufactured from stainless steel, the BA range of exhaust nozzles are particularly
suited to higher temperature applications.
The BA is equipped with a spring-locking lid, which acts as a shut-off valve
when not in use, which clamps the nozzle to the exhaust terminal.
The BA can be supplied in standard type, ‘R’ type (for use with large
twin exhaust terminals) and ‘P’ type (for use with 19mm CO gas analysing
probe).
|
There are 14 models in the BA range, with exhaust terminal
diameters ranging from 100mm to 200mm.
ModelsBA
1 | BA 2 | BA 3 | BA 4 | BA 5 | BA 6 | BA 7
BAR 1 | BAR 2 | BAR 3
BAP 1 | BAP 2 | BAP 3 | BAP 4
BG Rubber Nozzles
The BG rubber exhaust nozzle provides an excellent exhaust terminal
seal and damage prevention due to its elastic properties.
Each nozzle is also equipped with a wire screen guard, protecting
against accidental suction of matter and materials.
The BG can be supplied in standard type, ‘D’ type (for
use with twin exhaust terminals), ‘M’ type (with exhaust
clamping facility), ‘C’ type (fitted with activated carbon
filter) and ‘A’ type (fitted with automatic release).
There are 23 models in the BG range, with exhaust terminal diameters
ranging from 60mm to 200mm.
ModelsBG
0 | BG 1 | BG 2 | BG 3 | BG 4 | BG 5 | BG 6 | BG 7
BGM 2 | BGM 3 | BGM 4 | BGM 5 | BGM 6 | BGM 7
BGD 0 | BGD 1 | BGD 2
BGC 1 | BGC 2
BGA 1 | BGA 2 | BGA 3 | BGA 4
Special Nozzles
As well as the BA and BG range Fercell can supply a range of special
exhaust nozzles, designed for more complex exhaust terminals.
The BRA nozzle is stand mounted and designed for
applications where a nozzle cannot be easily fitted/clamped
or the exhaust terminal is over 200mmø.
The BLP has been designed for use with vertical stack exhaust terminals,
making it easier for operatives to connect to normally difficult
terminals.
MOBILE SYSTEMS
ELE Portable Exhaust Unit
The ELE is supplied in 2 model variants, working on
the same principle of a vertical, manually operated,
sliding mechanism (from 220mm up to 900mm).
The inlet nozzle is placed directly behind the exhaust
terminal, with the exhaust gases expelled via the 125ºC
flexible hose (which can be located in an appropriate
exhaust position).
ModelsELE
50 | ELE 55 |
|
